The Booster 8038 is a 80 × 80 × 38 mm high-pressure booster with dual-ball bearings as standard. It mounts in-line on ducting or directly on an enclosure wall to push air through long, restrictive paths.
The Booster 8038 targets the middle ground between axial airflow and centrifugal pressure: a 80 × 80 × 38 mm booster with steep blade pitch for resistance-heavy paths.
Booster 8038 units are produced on our own winding and impeller-balancing lines in Shenzhen, then 100 % aging-tested before packing. Performance figures in the table reflect typical delivered values; we confirm exact curves against your enclosure resistance during sampling, and speed, voltage window or connector can be tuned at no tooling cost for standard frames.
| Frame Size | 80 × 80 × 38 mm |
|---|---|
| Rated Voltage | 12 V DC (24 V optional) |
| Rated Current | 1.10 A (at rated voltage, max speed) |
| Speed | 4,800 rpm (typical; PWM control 0–100 %) |
| Airflow | 60 CFM / 102 m³/h (typical, free air) |
| Static Pressure | 185 Pa / 18.9 mmH₂O (typical, max) |
| Noise | 44 dBA at 1 m (max speed) |
| Speed Signal | Tach (FG) optional; PWM control optional |
| Bearing Type | Sleeve / One-ball / Dual-ball |
| Expected Life | 55,000 h at 25 °C, 65 % RH (L10) |
| Operating Temp. | −10 °C to +70 °C (standard); −40 °C to +85 °C optional |
| Insulation Resistance | ≥ 100 MΩ at 500 VDC |
| Dielectric Strength | 500 VAC / 1 min (AC series: 1,500 VAC) |
| Frame & Impeller | UL94 V-0 PBT + fibreglass |
| Certification | CE / RoHS (UL on request) |
Booster 8038 uses a high-static-pressure impeller and stator design that keeps airflow under strong back pressure — suited to dust filters, long ducts, range hoods and dense radiators where ordinary fans lose most of their CFM.
Yes, two Booster 8038 units in series roughly add their static pressure capability. Mount them with a short spacing section and confirm the second fan's inlet conditions with our engineers.
Auto-restart, polarity protection, tach and alarm signals are available. For humid or oily environments, conformal-coated PCBAs and IP54 grilles can be added.
Samples ship in 5–7 working days; volume MOQ is typically 200–500 pcs depending on configuration. Custom voltage, speed or connector versions need 10–15 days for first samples.
Send voltage, quantity and application — engineers reply within 24 hours, samples in 5–7 days.