The Booster 6038 is a 60 × 60 × 38 mm high-pressure booster with dual-ball bearings as standard. It mounts in-line on ducting or directly on an enclosure wall to push air through long, restrictive paths.
The Booster 6038 is a high-pressure axial booster fan in a 60 × 60 × 38 mm frame, typically specified to reinforce airflow in long duct runs and multi-stage ventilation systems.
Our Shenzhen line builds the Booster 6038 end to end — winding, balancing, assembly and 100 % aging. Because no step is outsourced, we can hold batch consistency and adjust bearing grade, lead length or speed binning to your production schedule.
| Frame Size | 60 × 60 × 38 mm |
|---|---|
| Rated Voltage | 12 V DC (24 V optional) |
| Rated Current | 0.80 A (at rated voltage, max speed) |
| Speed | 5,500 rpm (typical; PWM control 0–100 %) |
| Airflow | 35 CFM / 60 m³/h (typical, free air) |
| Static Pressure | 175 Pa / 17.8 mmH₂O (typical, max) |
| Noise | 41 dBA at 1 m (max speed) |
| Speed Signal | Tach (FG) optional; PWM control optional |
| Bearing Type | Sleeve / One-ball / Dual-ball |
| Expected Life | 50,000 h at 25 °C, 65 % RH (L10) |
| Operating Temp. | −10 °C to +70 °C (standard); −40 °C to +85 °C optional |
| Insulation Resistance | ≥ 100 MΩ at 500 VDC |
| Dielectric Strength | 500 VAC / 1 min (AC series: 1,500 VAC) |
| Frame & Impeller | UL94 V-0 PBT + fibreglass |
| Certification | CE / RoHS (UL on request) |
Booster 6038 uses a high-static-pressure impeller and stator design that keeps airflow under strong back pressure — suited to dust filters, long ducts, range hoods and dense radiators where ordinary fans lose most of their CFM.
Yes, two Booster 6038 units in series roughly add their static pressure capability. Mount them with a short spacing section and confirm the second fan's inlet conditions with our engineers.
Auto-restart, polarity protection, tach and alarm signals are available. For humid or oily environments, conformal-coated PCBAs and IP54 grilles can be added.
Samples ship in 5–7 working days; volume MOQ is typically 200–500 pcs depending on configuration. Custom voltage, speed or connector versions need 10–15 days for first samples.
Send voltage, quantity and application — engineers reply within 24 hours, samples in 5–7 days.