The Booster 8025 is a 80 × 80 × 25 mm high-pressure booster with dual-ball bearings as standard. It mounts in-line on ducting or directly on an enclosure wall to push air through long, restrictive paths.
The Booster 8025 targets the middle ground between axial airflow and centrifugal pressure: a 80 × 80 × 25 mm booster with steep blade pitch for resistance-heavy paths.
Every Booster 8025 passes automated winding inspection, dynamic balancing and a full aging cycle before it leaves our Shenzhen factory. When you request a sample we verify the operating point against your system's resistance curve and can adjust speed, voltage range or output leads without tooling charges on standard sizes.
| Frame Size | 80 × 80 × 25 mm |
|---|---|
| Rated Voltage | 12 V DC (24 V optional) |
| Rated Current | 0.90 A (at rated voltage, max speed) |
| Speed | 4,500 rpm (typical; PWM control 0–100 %) |
| Airflow | 45 CFM / 76 m³/h (typical, free air) |
| Static Pressure | 160 Pa / 16.3 mmH₂O (typical, max) |
| Noise | 40 dBA at 1 m (max speed) |
| Speed Signal | Tach (FG) optional; PWM control optional |
| Bearing Type | Sleeve / One-ball / Dual-ball |
| Expected Life | 55,000 h at 25 °C, 65 % RH (L10) |
| Operating Temp. | −10 °C to +70 °C (standard); −40 °C to +85 °C optional |
| Insulation Resistance | ≥ 100 MΩ at 500 VDC |
| Dielectric Strength | 500 VAC / 1 min (AC series: 1,500 VAC) |
| Frame & Impeller | UL94 V-0 PBT + fibreglass |
| Certification | CE / RoHS (UL on request) |
Booster 8025 uses a high-static-pressure impeller and stator design that keeps airflow under strong back pressure — suited to dust filters, long ducts, range hoods and dense radiators where ordinary fans lose most of their CFM.
Yes, two Booster 8025 units in series roughly add their static pressure capability. Mount them with a short spacing section and confirm the second fan's inlet conditions with our engineers.
Auto-restart, polarity protection, tach and alarm signals are available. For humid or oily environments, conformal-coated PCBAs and IP54 grilles can be added.
Samples ship in 5–7 working days; volume MOQ is typically 200–500 pcs depending on configuration. Custom voltage, speed or connector versions need 10–15 days for first samples.
Send voltage, quantity and application — engineers reply within 24 hours, samples in 5–7 days.