Booster Fan

Booster 12038 (Version 1)

Name: Booster 12038 (Version 1) Booster Fan
Brand: Ruifengda

The Booster 12038 (Version 1) is a 120 × 120 × 38 mm high-pressure booster with dual-ball bearings as standard. It mounts in-line on ducting or directly on an enclosure wall to push air through long, restrictive paths.

Frame Size120 × 120 × 38 mm

Voltage12 V DC

Max Airflow≈ 120 CFM

BearingSleeve / One-ball / Dual-ball

Request a Quote → Ask for Datasheet

Product Overview

Staged behind a primary fan, the Booster 12038 (Version 1) adds static pressure in a 120 × 120 × 38 mm format — a common approach for ventilation lines that lose airflow across filters and bends.

Booster 12038 (Version 1) units are produced on our own winding and impeller-balancing lines in Shenzhen, then 100 % aging-tested before packing. Performance figures in the table reflect typical delivered values; we confirm exact curves against your enclosure resistance during sampling, and speed, voltage window or connector can be tuned at no tooling cost for standard frames.

Key Features

Dual-ball bearing as standard for high-temperature, long-hour duty
Static pressure significantly higher than same-size axial fans
Reinforced impeller balanced to G6.3 for stable high-speed running
Ideal as an in-line booster on existing ducting
12 V / 24 V DC input with PWM control option
Tach signal available for airflow monitoring

Note: Specification values are representative; measured performance depends on system resistance and ambient temperature. Ask for the measured P-Q curve with your sample.

Typical Applications

Ventilation ducts & tunnels Chassis positive-pressure systems Range hoods & exhaust lines Equipment cabinet forced air Aquarium & hydroponics Long restrictive airflow paths

Full Specifications

Frame Size	120 × 120 × 38 mm
Rated Voltage	12 V DC (24 V optional)
Rated Current	1.70 A (at rated voltage, max speed)
Speed	3,200 rpm (typical; PWM control 0–100 %)
Airflow	120 CFM / 204 m³/h (typical, free air)
Static Pressure	185 Pa / 18.9 mmH₂O (typical, max)
Noise	50 dBA at 1 m (max speed)
Speed Signal	Tach (FG) optional; PWM control optional
Bearing Type	Sleeve / One-ball / Dual-ball
Expected Life	55,000 h at 25 °C, 65 % RH (L10)
Operating Temp.	−10 °C to +70 °C (standard); −40 °C to +85 °C optional
Insulation Resistance	≥ 100 MΩ at 500 VDC
Dielectric Strength	500 VAC / 1 min (AC series: 1,500 VAC)
Frame & Impeller	UL94 V-0 PBT + fibreglass
Certification	CE / RoHS (UL on request)

Frequently Asked Questions — Booster 12038 (Version 1)

What makes Booster 12038 (Version 1) a booster fan?

Booster 12038 (Version 1) uses a high-static-pressure impeller and stator design that keeps airflow under strong back pressure — suited to dust filters, long ducts, range hoods and dense radiators where ordinary fans lose most of their CFM.

Can Booster 12038 (Version 1) be daisy-chained in series?

Yes, two Booster 12038 (Version 1) units in series roughly add their static pressure capability. Mount them with a short spacing section and confirm the second fan's inlet conditions with our engineers.

What protection options exist for Booster 12038 (Version 1)?

Auto-restart, polarity protection, tach and alarm signals are available. For humid or oily environments, conformal-coated PCBAs and IP54 grilles can be added.

What is the lead time and MOQ for Booster 12038 (Version 1)?

Samples ship in 5–7 working days; volume MOQ is typically 200–500 pcs depending on configuration. Custom voltage, speed or connector versions need 10–15 days for first samples.