The EC 6025 pairs a brushless DC motor with a wide 100–277 V AC input, delivering DC efficiency on AC power. In its 60 × 60 × 25 mm frame it offers stepless speed control and substantially lower energy use than an equivalent AC fan.
The EC 6025 accepts 100–277 V AC input and converts it internally to drive a brushless DC motor, offering PWM and 0–10 V control interfaces in a 60 × 60 × 25 mm package.
EC 6025 units are produced on our own winding and impeller-balancing lines in Shenzhen, then 100 % aging-tested before packing. Performance figures in the table reflect typical delivered values; we confirm exact curves against your enclosure resistance during sampling, and speed, voltage window or connector can be tuned at no tooling cost for standard frames.
| Frame Size | 60 × 60 × 25 mm |
|---|---|
| Rated Voltage | 100–277 V AC, 50/60 Hz (wide input) |
| Rated Current | 0.20 A (at rated voltage, max speed) |
| Speed | 4,000 rpm (typical) |
| Airflow | 30 CFM / 51 m³/h (typical, free air) |
| Static Pressure | 60 Pa / 6.1 mmH₂O (typical, max) |
| Noise | 30 dBA at 1 m (max speed) |
| Speed Control | PWM / 0–10 V / potentiometer; tach feedback |
| Bearing Type | Sleeve / One-ball / Dual-ball |
| Expected Life | 50,000 h at 25 °C, 65 % RH (L10) |
| Operating Temp. | −10 °C to +70 °C (standard); −40 °C to +85 °C optional |
| Insulation Resistance | ≥ 100 MΩ at 500 VDC |
| Dielectric Strength | 500 VAC / 1 min (AC series: 1,500 VAC) |
| Frame & Impeller | UL94 V-0 PBT + fibreglass |
| Certification | CE / RoHS (UL on request) |
The EC version of EC 6025 uses a brushless DC motor with integrated electronics: higher efficiency, lower power draw at the same airflow, wide voltage input and controllable speed — ideal for equipment that runs long hours.
EC 6025 supports PWM (1–10 kHz), 0–10 V analog and NTC temperature-controlled modes. Speed curves can be programmed at our factory to match your thermal profile.
Standard EC input is 100–240 V AC or 12–60 V DC depending on the variant. Wide-input versions tolerate unstable grids and generator supplies — confirm the range with us before ordering.
Yes. Tach (FG), locked-rotor alarm (RD) and soft-start options are available on EC 6025; specify the signals you need when requesting a quotation.
Send voltage, quantity and application — engineers reply within 24 hours, samples in 5–7 days.