Centrifugal Blower

Blower 3010

Name: Blower 3010 Centrifugal Blower
Brand: Ruifengda

The Blower 3010 uses a forward-curved centrifugal impeller in a 30 × 30 × 10 mm scroll housing to deliver high static pressure through filters, ducts and dense heatsinks — the right choice where a same-size axial fan would stall.

Frame Size30 × 30 × 10 mm

Voltage12 V DC

Max Airflow≈ 8 CFM

BearingSleeve / One-ball / Dual-ball

Request a Quote → Ask for Datasheet

Product Overview

With its 30 × 30 × 10 mm scroll housing and forward-curved impeller, the Blower 3010 suits applications that need directed, pressurised airflow through restricted paths.

Production of the Blower 3010 is vertically integrated: winding, impeller balancing, assembly and burn-in happen in-house, and each unit is functionally tested before shipment. Samples are validated at your stated duty point so the mass-production curve matches what you measured.

Key Features

High static pressure output for filters, ducts and dense fin stacks
Forward-curved centrifugal impeller in UL94 V-0 plastic
Compact scroll housing with single or double inlet options
Ball-bearing versions for long life in any orientation
PWM speed control available on DC series
30 mm to 200 mm housing sizes to match your duct diameter

Note: Typical performance at nominal voltage. For designs near thermal limits we recommend a sample test at your enclosure's operating condition before release.

Typical Applications

Laser & projector cooling Server / 1U-2U chassis Air purifiers & range hoods Heaters & heat pumps Ducted ventilation Power electronics with dense heatsinks

Full Specifications

Frame Size	30 × 30 × 10 mm
Rated Voltage	12 V DC (5 V / 24 V optional)
Rated Current	0.30 A (at rated voltage, max speed)
Speed	9,000 rpm (typical; PWM control 0–100 %)
Airflow	8 CFM / 14 m³/h (typical, free air)
Static Pressure	90 Pa / 9.2 mmH₂O (typical, max)
Noise	30 dBA at 1 m (max speed)
Speed Signal	Tach (FG) optional; PWM control optional
Bearing Type	Sleeve / One-ball / Dual-ball
Expected Life	30,000 h at 25 °C, 65 % RH (L10)
Operating Temp.	−10 °C to +70 °C (standard); −40 °C to +85 °C optional
Insulation Resistance	≥ 100 MΩ at 500 VDC
Dielectric Strength	500 VAC / 1 min (AC series: 1,500 VAC)
Frame & Impeller	UL94 V-0 PBT + fibreglass
Certification	CE / RoHS (UL on request)

Frequently Asked Questions — Blower 3010

When should I choose the Blower 3010 blower instead of an axial fan?

Choose Blower 3010 when the enclosure has high airflow resistance — dense heat sinks, filters or long ducts. A centrifugal blower keeps steady pressure at restrictive duty points where an axial fan of the same size would stall.

Which way does Blower 3010 discharge air?

Blower 3010 is a forward-curved centrifugal blower: air enters axially and discharges radially through the scroll outlet, so plan the duct or vent direction accordingly. Outlet orientation can be customized.

Can Blower 3010 run at 24 V instead of 12 V?

Yes, Blower 3010 is offered in 5 V / 12 V / 24 V DC windings with matching speed and current. The same frame can be tuned for your supply rail at no tooling cost.

How noisy is Blower 3010 in real equipment?

Rated noise is measured at 1 m in free air. Inside a ducted enclosure, expect 3–6 dBA more; a PWM curve or rubber mounting pads usually reduces perceived noise noticeably.